Modular refuelling & tank engineering
Modular refuelling units
Supply defined as a system.
Discuss your project
Engineering perspective
Supply defined as a system.
Modular refuelling units and fuel facility systems. Storage, dispensing and site works defined together.
Consumption and replenishment cycles inform capacity. Confirm fuel, compartments, flow and dispensing points for the application.
Power, earthing, controls and protection are coordinated with the site and applicable requirements. An original configuration does not establish approval in every market.
Interfaces include circulation, unloading, foundations, drainage, canopy and auxiliary systems. Each participant needs an agreed scope.
| Modular range | Families from 10 to 50 m³; configuration to be confirmed |
|---|---|
| Systems | Storage, dispensing, control and protection |
| Site utilities | According to fuel, use and destination requirements |
Modular refuelling: configuration and operation
Module configuration, tank fabrication and site interfaces.
System options and selection criteria
Swipe the table to view all criteria →
| Configuration | Application | Engineering criterion |
|---|---|---|
| Volume range | 10 · 15 · 20 · 25 · 30 · 40 · 50 m³ | Catalogue reference capacities; confirm working volume and compartments. |
| Storage and dispensing | Module integrating tank, dispensing, control and service access | Define fuel, flow, metering, replenishment and vehicle access. |
| Site integration | Module, foundation, utilities and canopy as scoped | Confirm voltage, frequency, area classification and local acceptance before configuration is finalised. |
Inputs that define your project
- Fuel, consumption and replenishment
- Volume, compartments and flow
- Voltage, frequency and controls
- Site and applicable requirements
Interfaces to resolve
- Unloading and traffic circulation
- Power, drainage and foundations
- Protection and acceptance systems
Project documentation
- Agreed design inputs and criteria
- Drawings and interface schedule
- Fabrication and inspection documents
- Installation, testing and handover plan
Availability, detail and responsibilities are defined in the technical agreement.
Engineering questions
Does the 10–50 m³ range mean immediate availability?
The range describes reference capacities. Stock, fuel, compartments, electrical equipment and destination acceptance need confirmation for each enquiry.
What does a modular solution integrate?
It can integrate storage, dispensing, control and maintenance access. Civil works, protection, utilities and permissions are defined in the project scope.
Further perspectives
Refuelling and tanks: define capacity, service and scope.
The next step starts with your requirements.
Location, intended use, site conditions and scope. The right inputs make a focused technical discussion possible.